Residual noise level of 65dB(A) at 7m.
Designed to suit and to achieve an average of 65dB(A) @7metre @75% load, around the perimeter of the unit, under standard test conditions, free field.
All based on a 40°C maximum ambient operation.
ISO “type” container (see container dimensions table below) complete with steel reinforced floor.
The container fabricated from corrugated metal sheet and soundproofed with panels in class O with perforated steel protection.
2-off hinged double lockable doors provide access to both sides of the engine and alternator.
Recessed dish handles and weld-on hinges.
Twin side facing, internally mounted air inlet and outlets equipped with water traps and complete with vermin guards.
A complete residential exhaust silencer system is supplied, this can be mounted inside or outside the container with a noise reduction of 38db(A).
Exhaust: engine exhaust outlet, suitably weatherproofed.
Radiator filler access point in canopy roof if required.
A simple fuel pipe entry gland plate of uncut aluminium is supplied, and positioned as instructed / as required.
A simple cable entry gland plate of uncut aluminium is supplied, and positioned as instructed / as required.
INTERIOR AND EXTERIOR FINISH
External finish painted in a single standard colour 2-pack acrylic paint system, suitable for use in an inland environment.
Paint colour to be of your choice from the BS4800 / RAL / BS381C colour charts.
(Excluding RAL 9006 & 9007 metallic colours, which are not suited to wet paint systems).
Internally: self-colour galvanised finish.
The container floor is fully undersealed.
(Internal) – Optional extra.